CUBBY BOX SOLUTIONS DEFINITIVE
Verfasst: 6. Mär 2011, 22:19
Hello, friends of the forum!
Today I'll show you how to align the cubby box for an easy way!
Material:
2 screws;
One matchstick
Screwdriver!
The screw should be this size:
Now let's put that screw below the Cubby at the location indicated in red arrows:
If you still get a little bit upwards on the back you can put a piece of matchstick on both sides and the slot in the clamp! There is a gap where you can place ....
The result is a perfect alignment of Cubby very close to the dashboard! A gorgeous polish!
Today I'll show you how to align the cubby box for an easy way!
Material:
2 screws;
One matchstick
Screwdriver!
The screw should be this size:
Now let's put that screw below the Cubby at the location indicated in red arrows:
If you still get a little bit upwards on the back you can put a piece of matchstick on both sides and the slot in the clamp! There is a gap where you can place ....
The result is a perfect alignment of Cubby very close to the dashboard! A gorgeous polish!
