Navi MCD on FULL FIS display

[taketdi]

Hello ,
I'm a polo 9n fan and I have installed on my car an MCD navigations system VW and now I would like to send the navi and radio information to the FIS dispaly on the tacho.

In any post POLO16v said that simply connect the can l and can h of the navigation system to the canh and canl pin to the tacho whit a twister wire shield.

navi tacho
CAN h-------------------> Can H (comfort line)
CAN l -------------------> CAN L (comfort line)

I's all right.



Please help me.

[taketdi]

Excuse me this is the image


[img][img]http://img157.imageshack.us/img157/6564/vwhtm1bp3.png[/img][/img]

[DragonX]

you must enable this function by programming your car configuration. (value +16 for navigation)

[taketdi]

Hi,
Yes I have enable the softcode for tacho in 17132 . My ca is a polo 14 55kw 3 cylinder TDI.
I have istalled the navi two month ago and I don't have crimped the two wires can h and can l.
It's work in this mode??